Venezianico Redentore Levius: Titanium, Hand Guilloché and an Italian Heart
Venezianico built its reputation on value-packed Italian design. With the Redentore Levius, the Venetian brand aims higher: a 38mm Grade 5 titanium dress watch just 8.9mm thick, with a dial hand-engraved on a 19th-century rose engine and a hand-wound V5000 caliber made in Italy. On its strap the whole watch weighs about 48 grams. It sells for $5,550 in the US (€4,750 in Europe), and the first 100 pieces are individually numbered.

Venezianico announced the Levius on September 14, 2026 as a timed pre-order, and demand outran supply quickly: the numbered first series sold out within days, and later orders are scheduled to ship from late November. Here is why collectors moved so fast.
Lightness as a Design Brief
Levius is Latin for lighter, and the name sets the agenda. The Redentore line has always been Venezianico's dressier family, but this version rethinks it around titanium. The case, bezel and buckle are all Grade 5 titanium, the stronger, more polishable alloy that lets a brand mix brushed flanks with a mirror-polished bezel, something softer Grade 2 does less convincingly. The case alone weighs 12.9 grams, the head about 40 grams, and the complete watch around 48 grams on its strap.

The dimensions do the rest. At 38mm across, 8.9mm thick and 44.2mm lug-to-lug, the Levius sits squarely in classic dress-watch territory and should slide under a cuff on almost any wrist. Sapphire crystals front and back, the rear one secured by six screws, keep the profile clean. Water resistance is a modest 30 meters, so treat it as the dress watch it is.


The Zefiro Dial: Engraved by Hand
The headline feature is the dial. Its Zefiro pattern, named for the west wind, is cut by Linda Renzetti, the fourth generation of Atelier Renzetti, on a manually operated rose engine dating to the 1850s. Unlike many guilloché dials that frame the pattern with a plain chapter ring, the engraving runs edge to edge with no blank zones, so light moves across the whole surface as you tilt your wrist.
Hand guilloché at this price is rare. Most watches under $10,000 that look engraved use stamped or CNC-cut dials, which can be handsome but lack the slight variation and crispness of a hand-turned pattern. Venezianico tops the dial with double-faceted alpha hands, polished on one side and sandblasted on the other, so they stay legible against the busy texture.


“Hand-turned guilloché, an Italian movement and 48 grams on the wrist. At this price, that combination is close to unheard of.”
If you like this kind of hand-finished dial work, see how another independent approached it in our look at the Atelier Wen Perception V3.
Movement: The V5000, Made in Italy
Inside is the V5000, a hand-wound caliber manufactured in Italy by OISA and developed by movement designer Fausto Berizzi with Venezianico technical director Andrea Menegazzo. It beats at 25,200 vph (3.5Hz), stores 60 hours of power and is regulated to ±3 seconds per day. The spec sheet reads like a much more expensive watch: a free-sprung copper-beryllium balance with four adjustment weights supplied by Atokalpa, a double-supported balance bridge and KIF Elastor shock protection, all in a 3.5mm-thick movement.
Through the caseback you see a four-bridge layout finished with radial Côtes de Genève, polished bevels and hand-applied perlage. The Levius is a pure time-only watch with hours, minutes and seconds, and the hand-winding ritual suits it.





Swipe or use the arrows to browse
Technical Features
Movement
Functions
Case
Dial
Strap
Our Take: Where It Fits in the Market
At $5,550, the Levius is the most ambitious watch Venezianico has made, and it moves the brand into a new bracket. The comparison set is no longer affordable Italian design brands but independents and established makers offering hand-finished dials, where a genuine rose-engine dial often pushes prices well past $10,000. Here you get that dial plus a titanium case and an Italian-made movement with a premium balance for a little over half that.

The caveats are honest ones. Thirty meters of water resistance means this is not a swim watch, and 38mm titanium is so light that some wearers may miss the reassuring heft of a gold or steel dress watch. But for collectors who value craft over mass, it is one of the most interesting dress watches of the year. Browse more options in our dress watch collection.
Shop Venezianico at Central Time Zone
The numbered first series has sold out and the brand reports current production as fully booked, so act early if the Levius is on your list. Explore our Venezianico collection or contact our team to ask about availability of the Redentore Levius.
Venezianico Redentore Levius FAQs
How much does the Venezianico Redentore Levius cost?
The Redentore Levius is priced at $5,550 in the US and €4,750 in Europe.
What movement is in the Redentore Levius?
It uses the V5000, a hand-wound caliber made in Italy by OISA for Venezianico. It runs at 25,200 vph (3.5Hz) with a 60-hour power reserve and is regulated to plus or minus 3 seconds per day.
How big and heavy is the Redentore Levius?
The Grade 5 titanium case measures 38mm in diameter, 8.9mm thick and 44.2mm lug-to-lug. The case alone weighs 12.9 grams and the full watch about 48 grams on its strap.
Who engraves the Zefiro guilloché dial?
The dial is hand-engraved by Linda Renzetti of Atelier Renzetti on a manually operated rose engine from the 1850s. The pattern covers the entire dial with no plain chapter ring.
Is the Redentore Levius a limited edition?
The first 100 pieces are individually numbered on the caseback. That first series sold out shortly after launch, and later pre-orders are scheduled to ship from late November 2026.
Is the Redentore Levius water resistant?
It is rated to 30 meters (3 ATM), which covers splashes and rain but not swimming.