Oris ProPilot Calibre 111 Returns: Ten Days of Power in a Sharper 43mm Case
Oris built its reputation on value-driven automatics, but its ten-day, hand-wound manufacture calibers are what changed how collectors see the brand. Now the pilot's watch built around one is back. Unveiled at WatchTime New York on October 16, 2026, the refreshed ProPilot Calibre 111 puts the in-house, hand-wound Calibre 111 into a 43mm stainless steel case with 100 meters of water resistance and a choice of black or pine-green dials. It costs $7,400 on the steel bracelet and $7,200 on a dark brown Cordovan leather strap.

This update brings the sharper design of the 2025 ProPilot Date to Oris's ten-day manufacture caliber.
If you have been following Oris's in-house push, you may have already seen our look at the Oris ProPilot X Gonzo Edition, which uses the skeletonized Calibre 115 from the same family. The Calibre 111 is the more traditional, more wearable expression of that idea.
A Ten-Day Movement Comes Home
For roughly 35 years, Oris relied on Swiss-made ébauches that it finished and regulated rather than building its own. That changed in 2014 with the Calibre 110, developed with the École Technique Le Locle, which delivered a ten-day power reserve from a single, very long mainspring. A year later, in 2015, came the Calibre 111, which added a date. It quickly found its way into the Big Crown ProPilot collection, where its non-linear power reserve display became a signature.
The last ProPilot Calibre 111 measured 44mm and sat in the older, rounder ProPilot case. For 2026, Oris has rebuilt the watch around the sharper, more architectural design language it introduced on the ProPilot Date last year. The result is smaller, more cohesive and better finished, while keeping everything that made the original interesting.


Case, Dial and Wearability
A tighter 43mm case
The new stainless steel case measures 43mm across and 13.2mm thick, with a lug-to-lug of about 51mm and 20mm between the lugs. That is a millimeter narrower than the previous model, and the redesigned case profile, with its sharper transitions and tapered lugs, helps it wear more compactly than the numbers suggest. A domed sapphire crystal sits on top, anti-reflective coated on the inside, and a screwed sapphire caseback shows off the movement. Water resistance is 100 meters, more than enough for daily wear and a swim.
The bezel carries angled fluting inspired by the intake of a jet engine, a ProPilot signature that catches light without feeling fussy. The oversized crown is a nod to the pilot's watches of the 1930s and 1940s, when crowns had to be operated with gloves on. On a hand-wound watch, it also earns its keep every few days.

Black or pine green
The dial is where the update is most visible. The center is vertically brushed, while the outer area and portions of the main dial carry a more organic texture, giving the surface depth when light moves across it. Applied Arabic numerals and luminous hands and indices, all treated with Super-LumiNova, keep the layout clean and legible. Black is the classic instrument-panel choice; pine green is warmer and slightly more distinctive, and it fits neatly beside the green dials that have become an Oris hallmark.


The layout has also been rebalanced. Small seconds sit at 9 o'clock, the non-linear power reserve indicator at 3 o'clock, and the date window has moved from 9 to 6 o'clock, which gives the dial a calmer, more symmetrical feel than before.
“Ten days of power, a hand-wound caliber and a dial that tells you exactly when it is time to wind. Few pilot's watches at this price offer that much substance.”

Bracelet or Cordovan
The multi-piece steel bracelet closes with Oris's LIFT folding clasp, the same easy-to-operate clasp used across the ProPilot and Aquis lines. The alternative is a dark brown Cordovan leather strap with a seamless fit-adjustment system and a steel folding clasp. The strap version is $200 less and arguably softer in character, while the bracelet leans into the tool-watch side of the design.


Movement: Oris Calibre 111
The Calibre 111 is a hand-wound manufacture movement with a 240-hour, or ten-day, power reserve stored in a single barrel with an exceptionally long mainspring of around 1.8 meters. Oris lists a frequency of 21,600 vph (3Hz), a movement diameter of 34mm, stop-seconds for precise setting, a date corrector and a fine timing device.
The clever part is the power reserve display. Rather than a linear scale, the indicator at 3 o'clock is non-linear, so the graduations spread out as the reserve runs down. In plain terms, it is most precise when you need it most. Ten days between windings means you can leave it on the nightstand over a long weekend, or a week of travel, and come back to a watch that is still running and still on time.


Swipe or use the arrows to browse
Technical Features
Movement
Functions
Case
Dial
Strap/Bracelet
Our Take: Where It Fits in the Market
At $7,400 on bracelet, the ProPilot Calibre 111 sits well above the automatic ProPilot Date, but it competes on a very different level. Ten-day power reserves are rare at any price, and most rivals either use outsourced movements or cost considerably more. What you are paying for is an in-house, hand-wound caliber with a genuinely useful complication, in a case that now looks and feels as finished as the movement inside.
It is also an interesting alternative to the open-worked Calibre 113 models, such as the Oris Big Crown Calibre 113 43mm in green, which add a week and month display. The ProPilot Calibre 111 is simpler, sportier and more legible. If you prefer automatic winding and a lower entry point, the Big Crown ProPilot Date 41mm in black and the green-dial ProPilot Date on leather deliver the same aviation design cues for a fraction of the price.
Who is it for? Collectors who want a manufacture movement without moving into five-figure territory, and anyone who enjoys the ritual of winding a watch but would rather not do it every morning.
Shop Oris at Central Time Zone
Interested in the new ProPilot Calibre 111? Explore our Oris collection or contact our team to ask about availability of the black and pine-green versions on bracelet or Cordovan leather.
More From Oris
Oris ProPilot Calibre 111 FAQs
How much does the 2026 Oris ProPilot Calibre 111 cost?
In the US, the ProPilot Calibre 111 is priced at $7,400 on the stainless steel bracelet and $7,200 on the dark brown Cordovan leather strap.
What movement is in the Oris ProPilot Calibre 111?
It uses the in-house, hand-wound Oris Calibre 111 with a 240-hour (10-day) power reserve, a non-linear power reserve indicator, small seconds and a date, running at 21,600 vph.
How big is the new ProPilot Calibre 111?
The stainless steel case is 43mm in diameter and 13.2mm thick, with a lug-to-lug of about 51mm and a 20mm lug width. It is 1mm smaller than the previous version.
Is the Oris ProPilot Calibre 111 water resistant?
Yes. It is water resistant to 100 meters (10 bar), with a domed sapphire crystal and a screwed sapphire caseback.
What dial colors are available?
There are two: black and pine green. Both have a vertically brushed center, a textured outer area and Super-LumiNova on the hands and indices.
When was the new ProPilot Calibre 111 announced?
Oris presented the updated ProPilot Calibre 111 at WatchTime New York on October 16, 2026. It joins the permanent collection.

