NORQAIN Wild ONE Titanium: Three New Takes on the Ultra-Light Sports Watch

NORQAIN’s Wild ONE was built to take a beating. Now it gets a metal finish for the first time. The Swiss independent has introduced three Wild ONE Titanium models, each with a Grade 5 titanium top plate set into the watch’s signature sandwich of NORTEQ® carbon composite and rubber. There’s a 42mm Skeleton in mint, a 39mm Skeleton Limited Edition of 400 pieces in grey and light yellow, and a 42mm Special Edition with a dial cut from an iron meteorite. Prices start at $7,250.

NORQAIN Wild ONE Skeleton Titanium 42mm with mint green rubber strap and shock absorber, set on dark rock
The Wild ONE Skeleton Titanium 42mm in mint.

The original Wild ONE, launched in 2022, was NORQAIN’s answer to the ultra-light, ultra-tough sports watch: a NORTEQ case wrapped around a rubber shock absorber and tested to 5,000 G. The new titanium models keep that construction and add a brighter, more refined metal surface on top.

New to the brand? NORQAIN was founded in 2018 by Ben Küffer and is one of the few Swiss watchmakers still family-owned and fully independent. You may also remember our story on the Freedom GMT Enjoy Life “Holiday” Limited Edition and its Golden Ticket to the Maldives. NORQAIN has since revealed the secret: the winning watch, serial number 60529, has swim trunks in the date window that glow in the dark.

What Makes the Wild ONE Different

Most sports watches are a single block of steel or titanium. The Wild ONE is built in layers. A titanium container holds the movement. Around it sits a rubber shock absorber, and NORTEQ plates sandwich the whole assembly. NORTEQ is NORQAIN’s own carbon-fiber composite, made with a polymer that is 60% bio-based. NORQAIN says it is six times lighter than steel and 3.5 times lighter than titanium, and it is antimagnetic and corrosion-resistant.

On the titanium models, the top NORTEQ plate is replaced with sandblasted Grade 5 titanium, while the back plate stays black NORTEQ. NORQAIN says titanium is about 45% lighter than steel, so the watch keeps its featherweight feel. The contrast is the point: the gray metal now plays against the matte black composite and the colored rubber.

“A NORTEQ case, a rubber shock absorber and now a Grade 5 titanium top plate. It’s the Wild ONE with a sharper suit on.”

The Three New Models

Wild ONE Skeleton Titanium 42mm (Mint)

The core model pairs a mint-green shock absorber and mesh-pattern rubber strap with an openworked black dial. Rhodium-plated, diamond-cut skeleton indices carry mint Super-LumiNova, and the faceted hands have mint lume tips. NORQAIN moved the logo to the dial ring to show more of the movement. It measures 42mm across, 12.3mm thick and 49.4mm lug-to-lug, with 22mm lugs.

Close-up of the mint mesh-pattern rubber strap on the NORQAIN Wild ONE Skeleton Titanium 42mm
Mint mesh-pattern rubber
Detail of the openworked dial and Grade 5 titanium top plate on the NORQAIN Wild ONE Skeleton Titanium 42mm
Openworked dial and titanium top plate

Wild ONE Skeleton Titanium Limited Edition 39mm (Grey and Light Yellow)

The 39mm version is limited to 400 pieces and shifts to a softer palette: grey shock absorber, grey strap and light-yellow printing and lume. At 39mm across, 11.75mm thick and 45.75mm lug-to-lug with 20mm lugs, it’s a strong pick for smaller wrists or anyone who prefers a more understated sports watch.

NORQAIN Wild ONE Skeleton Titanium 39mm Limited Edition in grey with light-yellow accents, set on dark rock
39mm Limited Edition
Detail of the skeleton dial and light-yellow lume on the NORQAIN Wild ONE Skeleton Titanium 39mm Limited Edition
Light-yellow lume and printing

Wild ONE Meteorite Titanium Special Edition 42mm

The Meteorite swaps the skeleton dial for a slice of anthracite iron meteorite found in northern Sweden. Its natural Widmanstätten pattern, a crystal structure that forms only when iron-nickel metal cools over millions of years inside an asteroid, means no two dials are alike. Black-plated, diamond-cut indices and faceted hands carry white X1 Super-LumiNova, and the caseback reads “SPECIAL EDITION, METEORITE.” It shares the 42mm case dimensions with the mint Skeleton, with a grey shock absorber and strap.

NORQAIN Wild ONE Meteorite Titanium Special Edition with anthracite meteorite dial, set on dark rock
Meteorite Special Edition
Angled view of the NORQAIN Wild ONE Meteorite Titanium showing the Widmanstätten pattern on the dial
Every dial is unique

Click through the studio shots below to compare all three models side by side.

NORQAIN Wild ONE Skeleton Titanium 42mm with mint green rubber shock absorber and strap
Skeleton Titanium 42mm, mint
NORQAIN Wild ONE Skeleton Titanium 39mm Limited Edition in grey with light-yellow accents
Skeleton Titanium 39mm Limited Edition
NORQAIN Wild ONE Meteorite Titanium Special Edition 42mm with anthracite meteorite dial
Meteorite Titanium Special Edition

Swipe or use the arrows to browse

Movements: The New 4K Calibre and the Kenissi NN20/1

Both Skeleton models debut a new movement for the Wild ONE: the NORQAIN 4K Manufacture Calibre (NK26/1), developed with NORQAIN’s partners at AMT. It’s a COSC-certified automatic skeleton movement with 24 jewels, a 4Hz beat rate and a 65-hour power reserve. NORQAIN says that’s 24 hours more than its previous skeleton watches. Its bridges and rotor are shaped like mountain peaks, echoing NORQAIN’s 8K chronograph calibre, which takes its name from the world’s highest mountains. It comes with a 4+1 year warranty.

NORQAIN Wild ONE Skeleton Titanium 42mm showing the openworked 4K Manufacture Calibre through the dial
The openworked 4K calibre shows through the dial.

The Meteorite uses the NORQAIN Manufacture Calibre NN20/1, made by Kenissi, the movement maker that also supplies Tudor and Breitling. It is COSC-certified, with 27 jewels, a 4Hz beat rate and a 70-hour power reserve, plus a custom NORQAIN rotor.

Technical Features

42mm
Diameter
28,800VpH
Frequency
65h
Power Reserve
200m
Water Resistance
Movement
Skeleton modelsNORQAIN 4K Manufacture Calibre NK26/1, automatic
MeteoriteNORQAIN Manufacture Calibre NN20/1 by Kenissi, automatic
CertificationCOSC chronometer (all models)
Jewels24 (NK26/1) / 27 (NN20/1)
Frequency28,800 vph (4Hz)
Power Reserve65 hours (NK26/1) / 70 hours (NN20/1)
Case
ConstructionGrade 5 titanium top plate, titanium container, NORTEQ back plate, rubber shock absorber
42mm models42 x 12.3mm, 49.4mm lug-to-lug, 22mm lugs
39mm Limited Edition39 x 11.75mm, 45.75mm lug-to-lug, 20mm lugs
CrownScrew-down with rubber overmold
CrystalFlat sapphire, double anti-reflective
CasebackSapphire display back
Water Resistance200m
Dial
Skeleton 42mmOpenworked black, mint printing and lume
Skeleton 39mm LEOpenworked black, light-yellow printing and lume
MeteoriteAnthracite iron meteorite, white X1 Super-LumiNova
Edition39mm limited to 400 pieces
Strap
StrapMesh-pattern rubber (mint or grey)
R01Black NORTEQ pin buckle
R02Grade 5 titanium pin buckle
R03Black DLC titanium folding clasp
Pricing
Skeleton 42mm$7,250 (pin buckle) / $7,690 (folding clasp)
Skeleton 39mm LE$7,250 (pin buckle) / $7,690 (folding clasp)
Meteorite 42mm$7,750 (pin buckle) / $8,190 (folding clasp)
Retail PriceFrom $7,250
Shop NORQAIN

Our Take: Where It Fits

Between $7,000 and $8,000, most sports watches give you steel or titanium and a well-known movement. The Wild ONE Titanium gives you something less common: a multi-material, shock-absorbing case, a COSC-certified manufacture movement and an independent brand with a clear point of view. Titanium also gives the Wild ONE a more refined look that’s easier to wear with a jacket than the all-black original.

NORQAIN Wild ONE Skeleton Titanium 39mm Limited Edition on grey mesh rubber strap

Which one to pick? The mint 42mm is the headline model and the boldest. The 39mm Limited Edition is the one we expect to go first, since it’s limited to 400 pieces. And the Meteorite is the pick for collectors who want a dial that is truly one of a kind. For more lightweight options, explore our sport and pilot watches.

Shop NORQAIN at Central Time Zone

NORQAIN expects to deliver the Wild ONE Titanium models to retailers throughout October. Explore our NORQAIN collection or contact our team to reserve the model and buckle you want.

NORQAIN Wild ONE Titanium FAQs

How much do the NORQAIN Wild ONE Titanium watches cost?

The Wild ONE Skeleton Titanium 42mm and the 39mm Limited Edition are $7,250 with a pin buckle or $7,690 with a black DLC titanium folding clasp. The Wild ONE Meteorite Titanium Special Edition is $7,750 with a pin buckle or $8,190 with the folding clasp.

What is new about the Wild ONE Titanium?

It is the first Wild ONE with a Grade 5 titanium top plate. The rest of the construction, a titanium container, rubber shock absorber and NORTEQ carbon-composite back plate, carries over from the original Wild ONE.

How many Wild ONE Skeleton Titanium 39mm watches will be made?

The Wild ONE Skeleton Titanium 39mm is a limited edition of 400 pieces.

What movement is in the Wild ONE Skeleton Titanium?

Both Skeleton models use the new NORQAIN 4K Manufacture Calibre NK26/1, a COSC-certified automatic skeleton movement with a 65-hour power reserve. The Meteorite uses the Kenissi-made NN20/1 with a 70-hour power reserve.

What is NORTEQ?

NORTEQ is NORQAIN’s own carbon-fiber composite, made with a 60% bio-based polymer. It is lightweight, antimagnetic and corrosion-resistant.

Content Home Page