Schwarz Etienne: Independent Manufacture Spotlight, and In-House Micro-Rotors Explained
Most watch lovers have worn a Schwarz Etienne movement without ever seeing the name on a dial. For more than a century, this small manufacture in La Chaux-de-Fonds has built calibers and components for other brands. Today it also signs its own watches, and almost every one of them is built around the same elegant idea: a small, off-center winding rotor tucked into the movement instead of a big one sweeping over it.

In this spotlight we cover where Schwarz Etienne came from, what makes it a true independent manufacture, how a micro-rotor works compared with a full central rotor, and which in-house calibers and collections are worth knowing, from the Kari Voutilainen-finished Roma Synergy to the new 39mm titanium 1902 Petite Seconde.
Schwarz Etienne at a Glance
- Founded: 1902 in La Chaux-de-Fonds, Switzerland, by Paul Arthur Schwarz and his wife Olga Etienne, who combined their surnames.
- What it is: an independent, vertically integrated manufacture that designs and produces its own movements and most of its watch components.
- Signature technology: in-house automatic movements with micro-rotors, built on a 13¼-ligne (30.40mm) architecture.
- Home: Villa Sonnenheim, a historic mansion in La Chaux-de-Fonds.
- Collections today: 1902, Geometry, Roswell and La Chaux-de-Fonds, plus collaborative Synergy pieces.
A Century in La Chaux-de-Fonds
La Chaux-de-Fonds is one of the great company towns of Swiss watchmaking, a UNESCO-listed grid of streets laid out around the needs of the trade. Schwarz Etienne started there in 1902 as a fabrique, a workshop making watches and parts for others. According to Monochrome, the founders and their descendants went on to own the Alpha and Venus brands and later produced watches for clients including Dunhill and Chanel.
Like many family firms, it spent most of the 20th century as a supplier rather than a household name. The modern chapter began in the mid-2000s, when businessman Raffaello Radicchi invested in reviving the company. In 2008 Schwarz Etienne began developing and producing its own movements, and over the following years it built a family of calibers: the hand-wound MSE (2012), the automatic micro-rotor ASE (2013), the inverted ISE with its rotor and balance on the dial side (2015) and the tourbillon TSE (2016).
Hairsprings: the rarest kind of independence
Plenty of brands call themselves a manufacture. Far fewer can make a hairspring, the hair-thin coiled spring that governs the balance and, with it, the accuracy of the watch. Most of the Swiss industry buys them from a handful of suppliers. Schwarz Etienne has produced hairsprings through its sister company E2O Innovations, which also supplies other manufacturers. Monochrome reports that turning a 0.6mm wire into a finished hairspring takes about a month, with tolerances of 0.1 micron. WatchBase lists the hairspring of the ASE 200.00 caliber, with its flat Philips terminal curve, as produced by E2O.
That depth matters for collectors. It means the brand controls the parts that most affect how a watch keeps time, and it explains why other brands have long trusted it with private-label movements.

A new chapter under Florian Brossard
In July 2025 Florian Brossard, whose background includes Minerva and Greubel Forsey, joined as CEO. Speaking to Europa Star, he described a goal of a 50/50 balance between private-label work and the Schwarz Etienne brand itself. The company is small, with Europa Star reporting a team of 13 and annual production of roughly 200 to 250 watches, split roughly evenly between the Middle East, the United States and Asia. The first product of that strategy is the 1902 collection.
“Schwarz Etienne is the kind of manufacture that other brands quietly rely on. The 1902 collection is its case for being the name on the dial.”
Micro-Rotors Explained
Every automatic watch has a rotor: a weighted piece that swings with the movement of your wrist and winds the mainspring through a set of reverser and reduction wheels. In most automatics the rotor is a large half-moon mounted at the center of the movement, sweeping across the entire back. A micro-rotor is a much smaller weight set into the movement itself, usually off to one side and level with the bridges.
Central rotor vs micro-rotor
- Thickness. A central rotor sits on top of the movement, adding its own height plus clearance. A micro-rotor shares the same level as the bridges, so the movement can be much thinner. The ASE 200.00, for example, measures 5.35mm high including its winding system.
- The view. With a central rotor, half of the movement is always hidden behind a slab of metal. A micro-rotor leaves the bridges, wheels and balance in plain sight through the caseback, which is why so many finishing-focused brands love it.
- Winding efficiency. Here is the trade-off. A smaller rotor has less mass and a shorter radius, so it delivers less winding force per movement of the wrist. Makers compensate with dense metals such as 22k gold, platinum or tungsten, low-friction ball bearings and careful gearing. A desk-bound wearer may need to top it up by hand more often than with a big central rotor.
- Design complexity. The rotor takes up space that would otherwise go to the gear train, so engineers have to plan the whole layout around it. That makes micro-rotor movements harder and more expensive to develop, and one reason they remain relatively rare.

A short history of the micro-rotor
The micro-rotor is a 1950s Swiss invention, and its origin is a famous dispute. Hans Kocher of Büren filed a patent for the idea in June 1954. Universal Genève filed its own in 1955. Both were granted in 1958, and both companies presented their movements that year: Büren’s Super Slender and Universal Genève’s Microtor, which went on to power later versions of the Polerouter, the watch designed by a young Gérald Genta.
The idea quickly became the key to ultra-thin automatics. Piaget’s Calibre 12P of 1960 was just 2.3mm thick. Patek Philippe introduced its Calibre 240 in 1977, a micro-rotor movement that remains in production today, including in the Golden Ellipse. In the late 1990s Chopard launched its own manufacture with the L.U.C 1.96, a micro-rotor caliber with a 22k gold rotor. Today you will also find micro-rotors from independents and specialists such as Parmigiani, Laurent Ferrier and Grönefeld, and Schwarz Etienne belongs firmly in that company.
Schwarz Etienne’s In-House Micro-Rotor Calibers
Almost the entire Schwarz Etienne catalog is built on a shared 13¼-ligne (30.40mm) base that beats at 21,600 vph (3Hz). The brand uses that platform in several ways.
ASE 200: the classic
The ASE 200.00 is the brand’s core automatic. Per WatchBase it has 33 jewels, an 86-hour power reserve, hacking small seconds at 6 o’clock and a micro-rotor at 9 o’clock, with a variable-inertia balance made in-house. The ASE 200.02 variant powers today’s Geometry collection.

ASE 300: the new generation
The ASE 300.00 arrived with the 1902 collection in 2025. It has 191 components and 29 jewels, a micro-rotor running on ball bearings and the same 86-hour reserve at 3Hz. Europa Star describes six bridges with polished bevels, a sandblasted mainplate and Côtes de Genève. A GMT version, the ASE 320.00, powers the 1902 GMT, according to Europa Star.
ISE and TSE: the movement turned inside out
The ISE 100.00 is an inverted automatic, meaning the micro-rotor and balance face the dial side. It is 6.30mm high and drives the 45mm Roswell with an 86-hour reserve. The TSE 121.00 goes further, combining an inverted flying tourbillon with a micro-rotor at 6.35mm high and a 70-hour reserve in the La Chaux-de-Fonds Flying Tourbillon.
MSE: the hand-wound outlier
Not every Schwarz Etienne is automatic. The hand-wound MSE family is known for long power reserves. The current MSE 311.00, with twin barrels running in parallel, gives the 1902 Réserve de Marche a 120-hour reserve.
The Key Collections
Roma and Roma Synergy
For most of the 2010s, Roma was the face of the brand: a round, classic dress watch that housed both the ASE and MSE calibers. Its most celebrated version is the 2020 Roma Synergy, a collaboration with Finnish independent Kari Voutilainen. The 39mm steel watch used the ASE 200.00 with a micro-rotor in 18k rose gold decorated by the Voutilainen workshops, and it was made in two limited editions of 50 pieces, with grey or blue dials. SJX reported a price of CHF 27,400 before tax at launch, roughly three times the regular Roma with the same base caliber. It remains one of the best entry points for collectors who want Voutilainen finishing, and it established the Synergy name the brand still uses for collaborations.


1902
Named for the founding year, the 1902 collection is the clearest expression of the brand’s new direction. The case is grade 5 titanium, 39mm wide and 10.9mm thick, with a domed sapphire crystal. Sector-style dials with applied indices and a recessed small seconds come in silver, slate grey and a 4N gold tone. The range includes the Petite Seconde (ASE 300.00), the GMT and the hand-wound Réserve de Marche. In 2026 Monochrome reviewed a black DLC titanium Petite Seconde Heure Dorée limited to eight pieces.



Geometry
Launched in 2023 and designed with Éric Giroud, the Geometry takes the classic round watch and breaks its dial into sections. Each zone of the 18k gold dial gets a different hand-guilloché pattern, including azurage, clous de Paris and fluting. It runs on the ASE 200.02 micro-rotor caliber in a 39mm steel case. Recent versions include the Geometry Black and the Geometry Cherry.

Roswell
Roswell is the brand at its most playful. Its 45mm steel case is inspired by a flying saucer, and the inverted ISE 100.00 places the micro-rotor and balance on the dial side so you can watch the movement work without turning the watch over.

La Chaux-de-Fonds: the tourbillons
Named for the brand’s hometown, this is the high-complication line. It includes the Flying Tourbillon and the Petite Seconde Rétrograde Tourbillon, both built on inverted tourbillon movements. The steel Flying Tourbillon measures 44mm and uses the TSE 121.00, a self-winding flying tourbillon with a micro-rotor.

Flagship Pick: The 1902 Petite Seconde
If you want one watch that sums up Schwarz Etienne, this is it. The 1902 Petite Seconde launched in 2025 and is not a limited edition. It is light and slim thanks to its titanium case, and its proportions follow the mid-century dress-watch rulebook: 39mm across, 10.9mm thick and a 20mm lug width, with a recessed small seconds at 6 o’clock. Turn it over and the ASE 300.00 is on full display, its micro-rotor leaving the bridges and balance clear to see. Three dials are offered: silver, slate grey and a warm 4N gold tone.



Click through the studio shots below to compare the dials and details.
















Swipe or use the arrows to browse
Technical Features
Movement
Functions
Case
Dial & Strap
Pricing note: the 1902 Petite Seconde launched in the US at $21,900 in 2025 (CHF 18,500 excl. VAT in Switzerland). US retailers currently list it at around $23,500. Contact us for current pricing.
Our Take: Where Schwarz Etienne Fits
The independent micro-rotor dress watch is a small, crowded neighborhood at the top end. Laurent Ferrier, Grönefeld and Parmigiani all play here, often at well above $30,000. Schwarz Etienne’s pitch is that you get the same core ingredients for less: a movement designed and made in-house, a hairspring from its own family of companies, proper hand finishing and a micro-rotor that leaves the whole caliber on view.
What you give up is name recognition and resale certainty. Schwarz Etienne is still a connoisseur’s brand, and production is tiny. For many buyers, that is the appeal. The 1902 Petite Seconde is the most approachable way in, while the Geometry suits anyone who wants hand guilloché, and the Roma Synergy is the collector’s pick on the secondary market. If you like the idea of a quiet, under-the-radar independent, also read our guide to Sartory Billard, another small maker with an enthusiast following.
Shop Schwarz Etienne at Central Time Zone
Interested in an independent manufacture with real depth? Explore our Schwarz Etienne collection or contact our team to ask about the 1902 Petite Seconde, the 1902 GMT, the Geometry and the brand’s tourbillons.
Schwarz Etienne FAQs
Is Schwarz Etienne a true manufacture?
Yes. Schwarz Etienne designs and produces its own movements in La Chaux-de-Fonds, along with most of its watch components, and it has produced hairsprings through its sister company E2O Innovations. It also makes movements and components for other brands.
When was Schwarz Etienne founded?
Schwarz Etienne was founded in 1902 in La Chaux-de-Fonds, Switzerland, by Paul Arthur Schwarz and Olga Etienne. The company began developing its own movements in 2008.
What is a micro-rotor and why does it matter?
A micro-rotor is a small winding weight set into the movement, level with the bridges, instead of a large rotor mounted over the center. It allows a thinner automatic movement and leaves the movement visible through the caseback. The trade-off is lower winding force, which makers offset with dense metals and efficient bearings.
Which Schwarz Etienne calibers use a micro-rotor?
The automatic ASE family (including the ASE 200.00, ASE 200.02 and ASE 300.00), the inverted ISE 100.00 in the Roswell and the TSE 121.00 flying tourbillon all use micro-rotors. The hand-wound MSE family does not need one.
How much does a Schwarz Etienne watch cost?
The 1902 Petite Seconde launched in the US at $21,900 in 2025, and US retailers currently list it at around $23,500. Swiss prices run from CHF 13,200 excl. VAT for the Roswell to more than CHF 100,000 for the La Chaux-de-Fonds tourbillons.
What was the Schwarz Etienne Roma Synergy?
The Roma Synergy was a 2020 collaboration with independent watchmaker Kari Voutilainen. It paired a 39mm steel case with the ASE 200.00 micro-rotor caliber and a rose gold rotor decorated by the Voutilainen workshops, in two editions of 50 pieces.