Delugs Straps: Rubber, Leather, Titanium and Custom Straps Explained (Brand Guide)
A great strap can change a watch more than any other single upgrade, and few makers have built a following around that idea as quickly as Delugs. Founded in Singapore in 2018 by Kenneth Kuan and Chia Pei Qi, the brand began with leather straps crafted in a bedroom and now makes cut-to-size FKM rubber, Japanese shell cordovan, alligator and other exotics, watch-specific integrated straps, and its own steel and titanium clasps.

This guide covers where Delugs came from, what each material is good at, how its made-to-order and bespoke programs work, how to choose the right lug width and length, and how to look after a strap so it lasts. We have also listed representative US prices from delugs.com.
The Delugs Story: By Enthusiasts, for Enthusiasts
Delugs is the work of a husband-and-wife team, Kenneth Kuan and Chia Pei Qi, who taught themselves leathercraft before the watch hobby pulled them in. When Kuan started collecting, the couple saw a familiar problem: a really good strap usually meant tracking down an individual artisan and joining a long waiting list, while the alternative was a mass-produced strap that looked and felt cheap. Delugs was built to sit between those two worlds.
The brand launched in 2018, and the founders went full time after the pandemic. Instead of scaling by cutting corners, they trained specialist leathercrafters and invested in equipment that keeps the work consistent, which is how Delugs keeps prices within reach. Rubber straps followed in 2022, then sailcloth, fabric and a growing range of exotic leathers. Today the company ships worldwide from the USA, the UK and Singapore.


Recognition came fast. Chia Pei Qi was named to Forbes' 30 Under 30 Asia list, and in 2024 Ed Sheeran wore a Delugs Navy CTS rubber strap on his Patek Philippe during a concert, a moment that put the brand in front of a far wider audience. The company has since worked with watch brands on co-branded straps and has designed its own tools, from spring bar tools to a bracelet removal tool.
"To us, sustainability is longevity."
Delugs co-founders, speaking to Wristcheck
Materials at a Glance
Delugs' catalogue is large, but it breaks down into a handful of material families. Here is what each one does best.
FKM Rubber (CTS)
The CTS, or cut-to-size, rubber strap is the brand's signature. It is made from FKM, a fluoroelastomer that resists sweat, water and scratches better than silicone, and it keeps its shape instead of going limp. You trim the tail to your wrist and close it with a deployant clasp, so the strap sits flat with no loose end. Paired with the Micro-Adjust CTS clasp, you get 6mm of tool-free adjustment (3mm on each side), which helps on hot days or after a workout. Universal CTS straps start at $145 with the classic steel clasp included.


Leather: Shell Cordovan, Epsom, Buttero and More
Leather is still the heart of Delugs. The range includes Japanese shell cordovan from the Shinki Hikaku tannery, Italian Buttero, Babele and Pueblo, Epsom, Saffiano, Chèvre goat from France's Alran tannery, Chromexcel, nubuck, waxy leathers and Alcantara. Most straps are soft from the first wear, so there is little break-in. Standard leather straps typically cost $110, while shell cordovan Slim straps are $165.
- Shell cordovan: dense, smooth, vegetable tanned and slow to crease; it develops a deep patina.
- Epsom and Saffiano: embossed, structured and resistant to scuffs, good for dressier and everyday watches.
- Pueblo, Buttero and waxy leathers: vegetable tanned leathers that darken and soften with wear.
- Alcantara: light and soft, a sporty alternative to leather.

Alligator and Exotic Leathers
For dress watches, Delugs offers alligator and crocodile, ostrich leg and body, lizard and salmon leather. The matte alligator Signature straps are padded (tapering from 4.5mm to 2.2mm), saddle stitched and combination tanned for a pliable feel, and cost $205. Ostrich leg Signature straps are $165. Expect each exotic strap to look slightly different, because the scale pattern is natural.

Hardware: Steel and Titanium
Delugs designs its clasps and buckles in-house in Singapore. Most come in 316L stainless steel in brushed silver, yellow gold, rose gold and black finishes, and several are offered in titanium too:
- Fitwell Micro-Adjust Buckle: a pin buckle with a patent-pending 3mm micro-adjustment; $40 in steel, $50 in titanium.
- CTS Deployant Clasp: a butterfly clasp for CTS rubber; from $55 in steel, $75 in grade 2 titanium (gunmetal or graphite) or the engraved Mosaic finish.
- Micro-Adjust CTS Deployant Clasp: $80, steel, 6mm of total on-the-fly adjustment, made only for Delugs CTS straps.
- Spring Deployant Clasp: $95, an upgrade for leather straps.
Quick-release spring bars come as standard, with custom-welded knobs designed to stay put.


A Note on Forged Carbon
Forged carbon is a case material, made famous by watches such as the Audemars Piguet Royal Oak Offshore and Richard Mille. Delugs does not list forged carbon straps or hardware, and its site states it does not currently make straps for the Royal Oak or Royal Oak Offshore, which use proprietary integrated fittings. If you own a carbon-cased watch with standard lugs, such as the Tissot PRX Powermatic 80 Carbon, Delugs does offer leather, rubber and fabric options for it, and a black FKM rubber strap with a titanium clasp is a natural match for carbon.
Watch-Specific and Integrated Straps
Where Delugs stands out is fit. Instead of making one strap for every 20mm watch, it engineers adapters and curved ends for specific models so the strap meets the case without gaps. Current examples include:
- Rolex Submariner 41mm: integrated CTS rubber straps in ten colours, from $220.
- Vacheron Constantin Overseas: integrated CTS rubber from $325, plus Chèvre, Saffiano and nubuck leather at $250.
- Cartier Santos de Cartier: CTS rubber using Delugs' own D-Lock adapter, from $275; Santos-Dumont and Tank straps are also offered.
- Tissot PRX: integrated straps and engraved clasps sized for the 35mm, 38mm and 40mm cases.
- Patek Philippe Aquanaut: straps for the 21mm lug models, including the Navy CTS rubber and shell cordovan.
- Omega Speedmaster and MoonSwatch, Tudor, Panerai: dedicated collections on delugs.com.
- Apple Watch: an Apple Watch strap style in the made-to-order program and a $5 steel adapter.
Not sure if your watch is covered? Delugs has strap-finder pages for a long list of individual watch references. If a model is not yet supported, you can register interest, and the brand uses that demand to decide what to make next.

Custom, Made-to-Order and Bespoke
If the ready-stock range does not have what you want, Delugs offers two levels of custom work. Both are made only after you order, so allow several weeks; the site currently quotes around four to eight weeks depending on the backlog.
Made-to-Order (from $150)
Choose the leather and colour, the style (Signature, Slim, Side-Stitch, Row-Stitch, Chunky, Pilot, Rally, Stitchless and an Apple Watch version among others), the lug and buckle width (for example 20-18mm), the length, one of 75 thread colours, optional accent stitching, curved ends on request, and the buckle finish.
Bespoke (from $180)
Bespoke opens up almost everything: lining leather, keeper style, thread thickness (0.35mm or 0.55mm), stitch spacing, edge paint colour, overall strap thickness, hole shape, the number and spacing of holes, the distance from lug to centre hole, and the shape of the strap end.


How to Choose a Delugs Strap
1. Measure Lug Width
Lug width is the gap between the lugs where the spring bar sits, in millimetres. Check your watch's spec sheet or measure inside the lugs with calipers. Delugs lists sizes as lug width to buckle width, so a 20-16mm strap fits 20mm lugs and tapers to 16mm at the buckle. A stronger taper looks dressier; a gentler taper suits sports and tool watches.
2. Pick the Right Length
Delugs leather straps come in S (105/65mm), M (115/70mm) and L (125/75mm). The first number is the long side and the second is the buckle side. M is the middle option; measure your wrist and compare with a strap you already like. CTS rubber removes the guesswork because you trim it to fit.
3. Match the Material to the Watch
- Divers and sports watches: FKM CTS rubber, sailcloth or Delcro fabric.
- Dress watches: matte alligator, Epsom or shell cordovan in Slim or Signature styles.
- Field, pilot and vintage pieces: Pueblo, Buttero or waxy leathers that build patina.
- Integrated-bracelet sports watches: look for a watch-specific Delugs strap with a fitted adapter.
4. Choose Your Hardware
Match the buckle to the case metal. Titanium hardware suits titanium and carbon watches and is lighter on the wrist; gold-tone buckles suit gold and two-tone watches. If your wrist size changes through the day, the Fitwell buckle or a Micro-Adjust clasp is worth the small extra cost.
Care Tips
- Rubber: rinse in fresh water after the sea or pool, wash with mild soap now and then, and let it air dry.
- Leather: keep it away from water, sweat-heavy workouts and perfume; let it dry naturally if it gets wet, never with heat.
- Shell cordovan: buff with a soft cloth to restore shine; it resists water better than most leathers but still prefers to stay dry.
- Exotics: wipe with a dry, soft cloth and avoid moisture, which can lift the scales.
- Rotate: giving leather straps a day off lets moisture escape and helps them last.
- Check spring bars: when you swap straps, make sure each bar clicks home before you wear the watch.
Delugs backs its straps and accessories with a lifetime warranty against manufacturing defects and offers free worldwide shipping.






Swipe or use the arrows to browse
Delugs Prices at a Glance
Delugs Prices (USD)
Regular US list prices from delugs.com at the time of writing. Delugs often runs pre-order discounts, so check current pricing.
Our Take
The strap market is crowded, with cheap marketplace straps at one end and boutique artisans with long queues at the other. Delugs has carved out the middle by doing three things well: consistent leathercraft at around $110, an FKM rubber system that fits better than most OEM rubber, and model-specific engineering for watches that are hard to dress, such as the Overseas, the Santos and the Submariner. Its in-house clasps, including titanium and micro-adjust options, show a company that thinks about how a strap wears all day, not only how it looks in photos.
It is not the cheapest option, and integrated straps for high-end references cost more than universal ones. But for collectors who want an OEM-level fit without OEM pricing, Delugs is one of the easiest recommendations in the category. If you own a watch Delugs does not yet support, such as the Royal Oak, register interest and keep an eye on the catalogue.
Shop Delugs at Central Time Zone
Ready to give your watch a new look? Explore our Delugs collection for rubber, leather and exotic straps plus clasps and accessories. Pairing a strap with a new watch? See our brand guides to Formex and Sartory Billard for ideas.
Shop Delugs at Central Time Zone →
Delugs Straps: Frequently Asked Questions
Where is Delugs from and who founded it?
Delugs is a Singapore watch strap brand founded in 2018 by husband-and-wife team Kenneth Kuan and Chia Pei Qi, self-taught leathercrafters who started making straps in their bedroom.
What is a Delugs CTS rubber strap?
CTS stands for cut-to-size. The strap is made from FKM rubber, which resists water, sweat and scratches, and you trim it to your wrist before closing it with a deployant clasp. Universal CTS straps start at $145 with a steel clasp included.
Does Delugs make forged carbon or titanium straps?
Delugs does not list forged carbon straps or hardware. It does offer titanium hardware, including the Fitwell Micro-Adjust Buckle ($50 in titanium) and the CTS Deployant Clasp in grade 2 titanium ($75).
How do I choose the right Delugs strap size?
Measure your watch's lug width in millimetres and choose a matching lug-to-buckle size, such as 20-16mm. Leather straps come in S (105/65mm), M (115/70mm) and L (125/75mm) lengths; CTS rubber is trimmed to fit.
Can I order a custom Delugs strap?
Yes. Made-to-order straps start at $150 and let you choose leather, style, size, stitching and buckle finish. Bespoke straps start at $180 and let you change details such as lining, thickness, hole spacing and edge paint. Custom straps take several weeks to make.
Does Delugs make straps for the Rolex Submariner or Audemars Piguet Royal Oak?
Delugs makes integrated CTS rubber straps for the Rolex Submariner 41mm from $220. It does not currently make straps for the Royal Oak or Royal Oak Offshore, which use proprietary integrated fittings.
